The Beginner’s Guide to Networks

How to Install Fiber Optic Cables. Fiber optic cables are a significant technological innovation in the telecommunication industry. The cables aids the transmission of information in the form of light pulses through the glass or plastic fibers. One optic cable usually contain several fibers which enclosed by a layer known as cladding. To protect the fibers from damage, the manufacturers usually add two more layers referred to as buffer tube and jacket layer on top of the cladding layer. The fibers usually seem to be fragile since they are thin but are always stronger than copper. The fiber optic cables can withstand high temperatures for efficient use in hot regions. The cables are also resistant to breaking when pulled by a force of up to 200 pounds. The fibers cables are known to be insensitive to breaking and bends easily without breaking. The reason why telecommunication companies are replacing the copper cables with fiber cables is the fact they are cheaper and applicable in wireless network hardware. Installation of fiber cables is usually complicated and requires high levels of expertise. Below are some of the guides to follow to ensure that you have installed the fiber cables effectively. You should make sure that you are having the component before you begin the process of installation. The components needed depend on the application of the fiber optic cables while some are always common. To install any fiber cable you need a patch panel The patch panel is used to patch the cables and connect cables to the specified areas. Another universal component is the cable manager that protects the units from damage and permit the routing of the cables. The cable tie is an essential part that is used to tie together the cables and at the same time link them to other components.
6 Facts About Data Everyone Thinks Are True
Secondly, you should make sure that you have a plan. The plan will ensure that you make the right connections and avail the right components before you begin the process of installation. The installation plan should also contain the coloring codes and the cable units. Thin and high-density cable is better because of their ability to fit in tight places.
The Ultimate Guide to Businesses
Finally, the contractor also plays a role in determining the efficiency of the fiber cables. To install the fiber cables, you need to highly competent professionals. You should source for a highly experienced and certified contractor. The contractor should also provide you will record of the different components that will help to troubleshoot in case of a problem. If you follow the above-discussed guides, you will be able to enjoy using the fiber optic cables.

Comments are closed.